Isojets

The Isojet Series is built as a simple plug-in component complete with sealing O-rings. Fountains ranging from 0.8mm to 8mm diameter are available.

High velocity turbulent coolant is directed to the tip of the core-pin and returns to the manifold body via the annular gap between the fountain tube and the core-pin drilling. These parts plug into the main coolant manifold plate and accommodate a variety of coolant channel configurations and O-ring sealing facilities. 

Product Description

The Isojets series represents a large range and we would advise that you contact Thermacore Europe for your exact requirements.

Isojets provide a convenient and effective method of coupling an array of core-pins,within a mould tool, into a very efficient cooling circuit. This technique eliminates thetemperature gradients and large back pressures encountered in conventional seriesconnected circuits. A stainless steel in-built filter (optional) prevents particulateblockages within small fountain diameter (0.8mm up). Seals (O-rings) provide aneasy to install, leak free system. 

• Cut-to-size fountain tibe
• Works in any orientation 
• Stainless Steel construction
• Wide range of fountain diameters
• Directs coolant to critical areas
• Choice of fountain lengths
• Saves valuable tool making time
• One type for any location
• No orientation required
• Low system back pressure
• Cool cores equally
• Fountain diameters 0.8mm to 8mm
• Built-in filter (optional)
• Stainless steel construction
• Simple installation
• Universal manifold feed and exit (parallel)
• Three gasket positions incuded
• Parallel flow Isojets for balanced cooling

Isojet Series Data Sheet

Isojet Parallel Data Sheet